Products > Grinding Mill > SCM Series Super Thin Grinding Mill

SCM Series Super Thin Grinding Mill

[ Super Thin Grinding Mill Overview ]
On the basis of more than 15 years’ production experience of our company, we absorb grinding mill technology advantages from the same field abroad and domestic, organizing elite powder processing experts to investigate, research, try again and again; finally, we develop this high-efficiency and low-cost SCM Series Super Thin Grinding Mill.

[ Super Thin Grinding Mill Application ]
SCM Series Super Thin Grinding Mill is mainly applied to the powder processing of mineral products in industries of metallurgy, construction, chemistry, Fertilizer and mining etc. The grinding mill can produce powder from non-flammable and non-explosive mineral materials with Mohs hardness below 9 and humidity below 8%, such as barite, limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc.
[

SCM Series Super Thin Grinding Mill Main Features and Benefits

]
1. High efficiency. Under the same condition of finished particle size and power of motor, the output of thin grinding mill is 40% higher than airflow grinding mill and whisk grinding mill.
2. Environmental protection. Pollution and noise are lightened by using deduster and muffler so as to reach the requirement of national environmental protection when using thin grinding mill.
3. High safety. No axle tree or bolt is used in the grinding chamber, so there will be no worn out problem of bearing and sealing parts, and also no loose of bolts in the running of thin grinding mill.
4. Finished size can reach to d97≤5μm.
5. High using rate of spare parts.
SCM Series Super Thin Grinding Mill
magnifier
[

SCM Series Super Thin Grinding Mill Main Parts

]
The whole system of SCM Series Super thin grinding mill consists of main unit,deceleration machine , blower ,hammer crusher,dustpan elevator,electro-magnetic vibrating feeder,impulse dust cleaner,piping device, cyclone collector device,classifier,high-pressure motor and muffler.
Axletree seat and effuser air-in are built on the main seat.The antrum of mill is on the effuser air-in.Multi-layer dial set on the main axle lies in the middle of grinding antrum.There are sevel rollers distributing evenly on each dial.A gear reducer and motor are set on the main seat,while the powder collector is set on the top of the antrum mill.

[ SCM Series Super Thin Grinding Mill Main Technical Data ]
Model SCM6015 SCM8021 SCM10027
Number of Roller (piece) 15 21 27
Ring Diameter (mm) Φ600 Φ800 Φ1000
Number of Ring (piece) 1×3 1×3 1×3
Mai n Equipment Rotate Speed (r/min） 235 235 173
Max. Inlet Size (mm) ≤10 ≤10 ≤20
Final Size (mesh) 325~2500 325~2500 325~2500
Capacity (kg/h) 325~2500 600~4000 900~6800
Overall Size (m) 10×2.3×5.5 13×3×5.8 18×4×8.6

 

[ SCM Series Super Thin Grinding Mill Technical Data ]
Name Item Unit Specification and Technical Data
SCM6015 SCM8021 SCM10027
Motor of Main Machine Model   Y225s-4 Y250M-4 Y315S-4
Power KW 37 55 110
Classifier Frequency Modulation Motor Model   Y160M-4 Y180M-4 Y200L1-4
Power KW 11 18.5 30
Motor of Elevator Model   Y100L-4 Y100L-4 Y100L-4
Power KW 3 3 3
Motor of Blower Model   Y200L1-2 Y225M-2 Y280M-2
Power KW 30 45 90
Hammer Crusher Model   PC250X400 PC300X400 PC400X600
Power KW 15 15 18.5
Vibrating Feeder Model   GZ1F GZ1F LS180X1050
Power KW 0.06 0.06 0.2
Discharge　Value Model   ZJD1:40 ZJD1:40 ZJD1:40
Power KW 0.75 0.75 0.75
Pulsed Duster Model   DMC72-Ⅱ DMC120-Ⅱ DMC120-Ⅱ
Note: This specification is just reference, any changes are subject to the SCM Series Super Thin Mill products
[

SCM Series Super Thin Grinding Mill Operation and Maintenance

]
To make grinding mill normal operation and maintenance , the choice of lubricants, use, storage is very important. Because of the lubricants ,we can avoid direct contact with the surface of grinding mill parts and reduce friction , wear and tear. While taking advantage of thermal conductivity of the oil ,the heat generated by friction can be passed. So it should be kept clean and a certain degree of viscosity of lubricating oil, when ensuring adequate and smooth flow.
If you need to stop grinding mill for a longer time, you should pour the balls out, to avoid the tube bend. In cold areas,such as in winter, you should release bearing cooling water in order to avoid Frost Crack.

Contact e-mail: sbm@unisbm.com

Attachments:
SCM Series Super Thin Grinding Mill PDF Download (2.01MB)

See more pictures about SCM Series Super Thin Grinding Mill, click here.