MTM Medium Speed Trapezium Mill

Trapezium Mill consists of main unit, powder classifier, cyclone collector,decelerator,dust catcher, blower, motor,and pipes. The optional accessories include jaw crusher, elevator, feeder, and control cabinet.

    1, The spindle refueling time should for each class plus, but it should be noted that the oil found in oil-cup there is no loss or loss is too slow, they should immediately wash the oil Road, together with 50 # machine oil, oil cup top position in the spindle, spindle base bearings, roller bearing axle with grease gun for each class notation 3 # lithium based grease once a parser bearings cleaned once every six months apart, add a little 3 # lithium based grease, fan bearings room plus lithium Grease.
    2, forbidden piece of metal into the machine, otherwise it will damage grinding roller and grinding ring, and even center hanger and so on.
    3, feeding should be uniform, non-erratic. feeding too much will be blocked duct, lower output, easy to burn out motor, feeding too little is not good also. Feed size: hard material in the diameters less than 15 mm, preferably, soft material diameter of 20 mm, large pieces of material is strictly prohibited to join the machine.
    4, air volume control: in the fan on the intake manifold air flow control valve, generally open to maximum position, according to fineness, yield requirements appropriate adjustments. Is located in the exhaust pipe on the exhaust exit control valve, transferred to feed the mouth can be no dust emitted. Air volume is small, thin high. It should be noted, wind is too small, the host within a duct beneath the easy precipitation of materials, please be adjusted appropriately.
    5, fineness adjustment, according to materials, size, hardness, moisture content, the proportion of different degree of processing of different thickness, adjustable top of the analyzer, high speed, fineness high, speed low, thin low. Improve the fineness, the output will be reduced accordingly, if it is mainly the fan speed when debugging, the user can flexibly.
    6, roller mill scrap ring limit, the remaining minimum wall thickness of not less than 10mm.
    7, parking, the first stop feeding, the host continues the mood, so that residual abrasive continued milling, about a minute, you can disable the host motor and motor analyzer, stop grinding work, and later stopped fan motor, the net in order to blow residual powder.